Product Detail

Hot spring pool heat pump-heater equipment-Heat Siphon hot salon hot spring pool heat pump-7HP

产品详情
Model: 7HP



The working principle of the "Hot Salon" heat pump: It transfers the heat of the air to the swimming pool, and the heat generated is 800% of its own energy consumption. It is a high-tech swimming pool product. The "Hot Salon" automatically maintains the pool temperature with a deviation of 1.5 Fahrenheit Degree range. The water temperature regulator and the water flow switch constantly monitor the water temperature of the swimming pool and the operation of the pump. With the circulating pump running, the hot salon will be activated when needed. A temperature regulating extension device is used inside the "Hot Salon" to efficiently control the heat pump system without being affected by air temperature or water temperature. If the pool filter is clogged or the fresh air supply to the machine is interrupted or there is a danger of freezing, the hot salon will be closed.


HEAT SIPHON Hot Salon-Swimming Pool Heat Pump


Since 1975, the HEAT SIPHON thermal salon of ThermoAmp in the United States, as an innovative and trustworthy manufacturer of heating devices for swimming pools and jacuzzis, has been welcomed by customers.

ThermoAmp has launched swimming pool heat pumps that people often use at present, including the first insulated heat exchanger, low-noise Venturi fan holders and injection heat exchangers. The swimming pool system first uses titanium heat exchangers and Copeland scroll compressors. Heater is a manufacturer of swimming pool heating equipment that provides lifetime anti-corrosion guarantee for water heat exchangers.

HEAT SIPHON hot salon is an air source heat pump used in swimming pools and massage pools. Its basic principle is similar to reliable refrigeration technologies such as air conditioners and refrigerators. Use the heat in the outdoor) to "move" into the water of the swimming pool, and only consume the electricity needed to "carry" the heat. The HEAT SIPHON hot salon can "handle" the heat nearly 8 times as much as its own operating consumption. It is an environmentally friendly and energy-saving product.


Energy saving and environmental protection: no pollution, rapid heating at a very low cost;

Safe and reliable: meet UL and CSA safety standards, fully tested before leaving the factory;

Reliable technology: the scroll-type thermal salon can work efficiently at lower air temperature, and the noise of the compressor is also lower;

Durable and anticorrosive: pure titanium insulated heat exchanger can resist the corrosion of chlorine in water;

Simple operation: precise 24 volt temperature regulator, accuracy up to 1.5°F, can be set by a knob;

Fast installation: only 220V power supply and standard 1.5-inch PVC pipe are required, and the installation can be completed within a few hours.