Introduction of three-in-one heat pump for thermal salon

one. Overview of constant temperature dehumidification heat pump for swimming pool

The special heat pump type constant temperature dehumidifier for swimming pool uses the principle of "air conditioning" to "transfer" the energy in the air or water to the water, so as to achieve the purpose of heating the water. Since the heat pump only consumes its own operating energy and "transfers" external energy to the water, it achieves high efficiency and energy saving. The operating cost of a heat pump type thermostatic dehumidifier for swimming pools is only 50% of that of gas boilers and 30% of (direct) electric heaters.

The heat pump type constant temperature dehumidifier for swimming pool uses electricity as the driving force and does not need a chimney. It can be placed in any space such as indoor, outdoor, ground or ceiling according to your requirements. It eliminates the potential safety hazards, smoke and noise pollution of traditional heating boilers. Restrictions on installation location and appearance requirements, as well as many restrictions such as complicated approvals caused by this.

two. "Heat Salon" swimming pool constant temperature dehumidification heat pump (three-in-one) application in indoor swimming pool

(1) The common problems of air conditioning, dehumidification and pool water heating in general swimming pool areas

For a healthy swimming pool, daily energy consumption is mainly the cost of air conditioning in summer for cooling and winter heating and pool water heating. Therefore, it is very important to choose a suitable air conditioning and pool water heating system. For the design of the air conditioning and water heating part of the swimming pool area, the following problems generally exist:

1. Harm to health: As a large amount of water evaporates in the swimming pool area and chlorine evaporates, the water vapor content and chlorine content in the air increase, which seriously affects the health of swimmers.

2. The problem of dehumidification is serious: In addition to meeting the indoor air requirements, the air conditioning design process is more important to regulate the humidity. The swimming pool area is a high-humidity environment, coupled with the high water vapor and chlorine content in the air, it is easy to produce a large number of bacteria, molds, and viruses. It is easy to damage the indoor air quality and decorative materials. The dehumidification process is the main part of the swimming pool throughout the year. problem.

3. High operating costs: For commercial sites, the level of daily operating costs in the future will largely determine the profitability of the project. Traditional air-conditioning and water heating cannot achieve comprehensive energy utilization, which will consume a lot of energy and cause waste. Astonishing.

4. There are many configuration equipments and operation is difficult: traditional installation and configuration of air-conditioning and heating equipment are numerous, and operators need to operate a large number of equipment proficiently.

(2) The swimming pool constant temperature dehumidification heat pump creates a high-end comfortable swimming pool environment

Indoor swimming pool dehumidification requirements are very strict. In this regard, the dehumidification heat pump is designed and manufactured to solve the related problems of indoor swimming pools. It integrates the three functions of pool water heating, dehumidification and air conditioning. It maintains a constant temperature and humidity in the indoor swimming pool, resulting in long energy consumption. It is lower than other methods. In addition, the special heat pump type constant temperature dehumidifier for swimming pool designs and manufactures various types of indoor swimming pool heat pumps. According to your actual requirements, try to consider the comprehensive utilization of energy to make the swimming pool suitable for you.

1. Healthy and comfortable swimming pool: The indoor swimming pool meets the human comfort requirements in terms of water quality, temperature and humidity, lighting, and pungent smell, reflecting its high-end level.

High-quality water quality and color give people a great sense of comfort. When the water quality of the swimming pool must reach the crystal transparency, this requires water quality ozonation treatment and the cooperation of light. In water treatment, adding a small amount of sodium hypochlorite will help keep the water crystal clear. For high-end swimming pools, there are ozonization and de-ozone devices, which can greatly reduce the amount of sodium hypochlorite in the water body, which can effectively reduce the chlorine content in the indoor air and reduce the irritation of chlorine to the human body.

2. Energy-saving swimming pool: in winter, in order to avoid the large waste of energy caused by the use of ordinary ventilation methods, a special heat pump type constant temperature dehumidifier for swimming pools is used. The swimming pool integrates the three functions of pool water heating, dehumidification and air conditioning, and can control the indoor space humidity In the range of 55-70% that is most comfortable for the human body, and for indoor swimming pools, the water temperature is generally controlled at 26-28 ℃ ("Swimming Pool and Water Amusement Pool Water Supply and Drainage Design Regulations"), and the air temperature is 1 to 2 higher than the water temperature. ℃.

3. Intelligent swimming pool: fully automatic operation and convenient management. The use of a hybrid "three-in-one" special heat pump type constant temperature dehumidifier for swimming pools can make the swimming pool area of the clubhouse be managed separately and meet the air conditioning needs of the indoor constant temperature pool in four seasons, which greatly facilitates the management of equipment operation. The heat pump control part mainly includes water temperature controller, room temperature controller and humidity controller. The automatic control system can realize automatic remote control, and the indoor temperature, humidity and pool water temperature can be set at will, which has reached the use requirements, and the use of the dew point temperature sensor should avoid condensation on indoor glass windows and external walls as much as possible.

In short, in the different positions of the indoor swimming pool, considering the adaptability of the five senses of the human body, the heat pump type constant temperature dehumidifier for swimming pools is considered for swimmers in every part of the swimming pool. With the design concept of quality, performance and energy saving, we will bring you perfection. The indoor swimming pool will make your investment not only bring rich returns, but also a brand-new experience of enjoying life!

3. "Heat Salon" three-in-one heat pump working principle and operating instructions

The working principle of the "Heat Salon" three-in-one heat pump

The three-in-one heat pump series is a product specially developed for indoor swimming pools. It integrates air conditioning, dehumidification and pool water heating, recovers a large amount of energy and comprehensively utilizes it, overcomes many problems such as high humidity and high chlorine environment, through the spring, summer, autumn and winter operation mode The change to achieve high-efficiency and energy-saving operation, its working principle is as follows:

The working principle of the "Heat Salon" three-in-one heat pump, in short, is to recycle the evaporation heat loss from the surface of the pool water and transfer it to the pool water and air to compensate for the heat loss of the pool water and air, and at the same time realize the air conditioning and dehumidification function. The working procedure can be roughly divided into two steps:

In the first step, the warm and humid air flows through the lower part of the heat pipe heat exchanger and the evaporator, the temperature drops, and the warm water vapor condenses into cold water droplets and separates from the air to make the air dry and achieve air dehumidification. At the same time, air cooling, water vapor condensation and The heat energy released during the cooling process is absorbed by the refrigerant.

In the second step, the heat energy absorbed by the refrigerant first passes through the heat exchanger to heat the pool water to realize the pool water heating function; the waste heat passes through the upper part of the heat pipe heat exchanger and the air condenser to heat the cooled air to realize the air insulation function.

Since the heat energy will be lost through the conduction of wall windows and other new air, when the heat energy generated by the special heat pump type thermostatic dehumidifier for swimming pools is not enough to meet the requirements, the auxiliary air heater can supplement the heat energy required for indoor heating. Only need to provide its own operating power, the special heat pump type constant temperature dehumidifier for swimming pool can continuously circulate according to the above working procedures, and achieve the harmonious balance of the three functions of "pool water heating, air conditioning, and dehumidification" with lower energy consumption.

Several special operating conditions of the three-in-one:

(1) Hierarchical configuration of auxiliary heaters in winter. In the cold winter season, when the ambient temperature is low, the heat pump can no longer fully maintain the indoor constant temperature and needs to rely on auxiliary heating to supplement energy.

The first is to use electric heating to directly heat the air by installing an electric heater on the air duct. The electric heater is added step by step according to the indoor air temperature, which avoids waste of equipment investment or operating costs.

The second is: use a surface cooler on the air duct to heat (refrigerate) the air, we directly connect the hot water (chilled water) to the surface cooler, and realize the heating (cooling) of the air through the multi-stage addition of heat. ).

(2) The new wind operation mode in spring and autumn.

This is a special heat pump type constant temperature dehumidifier for swimming pools specially designed for transitional seasons. When the state of outdoor air in transitional seasons meets the requirements of indoor air (air temperature is 15℃~26℃, relative humidity is less than 60%), it will run with fresh air. Mode, at this time, only the two fans of the heat pump are working, so the energy saving is obvious.

Fourth, the structural characteristics of the swimming pool constant temperature dehumidification heat pump unit

1. Heat pump compressor. Adopt scroll compressor, no reciprocating motion mechanism, simple structure, small size, light weight, few parts (especially few wearing parts), high reliability; stable operation, simple operation, easy to realize automation in its adaptive refrigeration It has high efficiency within the range of volume; low noise.

2. Compressor refrigerant R-407C. The working medium of the compressor adopts R-407C, which is 100% free of "fluorine", does not produce the greenhouse effect, and does not destroy the ozone layer; it can directly replace R22 and can use mineral oil and other lubricating oils; it has a high energy efficiency ratio, and it is proved by experiments that it is better than traditional refrigeration The agent can save 12.5% to 25% energy.

3. Heat pump heat exchanger. It adopts titanium tube heat exchanger, PVC shell, and has corresponding heat exchanger anti-corrosion measures, and has high-quality warranty service.

Fifth, the advantages of the swimming pool constant temperature dehumidification heat pump system

1. Environmental protection and safety. The heat pump type thermostatic dehumidifier for swimming pools is an excellent environmentally friendly product. The heat pump unit completely adopts advanced "Copeland" scroll compressors, which are electrically driven and have no exhaust emissions. It has low operating noise and can be placed outdoors, which can avoid environmental pollution caused by exhaust gas produced by oil and gas, and remove the fire and explosion hazards of clubs caused by the existence of liquefied petroleum gas and diesel.

2. High efficiency and energy saving. The heat pump unit adopts many patented technologies of our company, the comprehensive COP coefficient is high, and the equipment operation efficiency is greatly improved. Its operating cost is only 1/4 of that of direct-fired electric heating. The heat pump integrates dehumidification, air conditioning, and pool water heating, which saves operating energy costs. Significant; compared with traditional ventilation and dehumidification, the average cost saving is 40-60%.

3. The structure is resistant to chlorine corrosion. Specialized design and manufacture make the heat pump type constant temperature dehumidifier for swimming pools can effectively avoid the corrosion of the air conditioner host by a small amount of residual chlorine in the air. All key components (compressors, control systems, etc.) are installed in a compartment separate from the return air of the swimming pool. The casing and structure of the unit are sprayed with epoxy resin anti-corrosion paint, the air heat exchanger is sprayed with anti-corrosion materials, and all copper coils are optional.

4. Intelligent control and convenient management. The use of a three-in-one swimming pool special heat pump type constant temperature dehumidifier can make the pool area of the clubhouse be managed separately, and the operating cost can be calculated separately to meet the four-season air conditioning needs of the indoor constant temperature pool. It is fully automatic and easy to manage.

5. Advanced technology. The company cooperates with well-known American swimming pool equipment manufacturers, draws on foreign advanced technology development concepts, combines the advantages of domestic universities in technology development, and continuously develops new technologies and new processes that meet the needs of domestic customers.

6. Stable and reliable performance. Refrigeration system, control system such as compressor, thermal expansion valve, electronic appliances and other key components are imported products with reliable performance